Search results for "Counting rate"
showing 10 items of 11 documents
Digital performance improvements of a CdTe pixel detector for high flux energy-resolved X-ray imaging
2015
Abstract Photon counting detectors with energy resolving capabilities are desired for high flux X-ray imaging. In this work, we present the performance of a pixelated Schottky Al/p-CdTe/Pt detector (4×4) coupled to a custom-designed digital readout electronics for high flux measurements. The detector (4×4×2 mm 3 ) has an anode layout based on an array of 16 pixels with a geometric pitch of 1 mm (pixel size of 0.6 mm). The 4-channel readout electronics is able to continuously digitize and process the signals from each pixel, performing multi-parameter analysis (event arrival time, pulse shape, pulse height, pulse time width, etc.) even at high fluxes and at different throughput and energy re…
Direct Measurement of Mammographic X-Ray Spectra with a Digital CdTe Detection System
2012
In this work we present a detection system, based on a CdTe detector and an innovative digital pulse processing (DPP) system, for high-rate X-ray spectroscopy in mammography (1–30 keV). The DPP system performs a height and shape analysis of the detector pulses, sampled and digitized by a 14-bit, 100 MHz ADC. We show the results of the characterization of the detection system both at low and high photon counting rates by using monoenergetic X-ray sources and a nonclinical X-ray tube. The detection system exhibits excellent performance up to 830 kcps with an energy resolution of 4.5% FWHM at 22.1 keV. Direct measurements of clinical molybdenum X-ray spectra were carried out by using a pinhole…
Experimental results from Al/p-CdTe/Pt X-ray detectors
2013
Recently, Al/CdTe/Pt detectors have been proposed for the development of high resolution X-ray spectrometers. Due to the low leakage currents, these detectors allow high electric fields and the pixellization of anodes with the possibility to realize single charge carrier sensing detectors. In this work, we report on the results of electrical and spectroscopic investigations on CdTe diode detectors with Al/CdTe/Pt electrode configuration (4.1×4.1×0.75 and 4.1×4.1×2 mm3). The detectors are characterized by very low leakage currents in the reverse bias operation: 0.3 nA at 25 °C and 2.4 pA at -25 °C under a bias voltage of -1000 V. The spectroscopic performance of the detectors at both low and…
High-rate x-ray spectroscopy in mammography with a CdTe detector: A digital pulse processing approach
2010
Purpose:Direct measurement of mammographic x-ray spectra under clinical conditions is a difficult task due to the high fluence rate of the x-ray beams as well as the limits in the development of high resolution detection systems in a high counting rate environment. In this work we present a detection system, based on a CdTe detector and an innovative digital pulse processing (DPP) system, for high-rate x-ray spectroscopy in mammography. Methods: The DPP system performs a digital pile-up inspection and a digital pulse height analysis of the detector signals, digitized through a 14-bit, 100 MHz digitizer, for x-ray spectroscopy even at high photon counting rates. We investigated on the respon…
Background and muon counting rates in underground muon measurements with a plastic scintillator counter based on a wavelength shifting fibre and a mu…
2010
AbstractIn this short note we present results of background measurements carried out with polystyrene based cast plastic 12.0×12.0×3.0 cm3 size scintillator counter with a wavelength shifting fibre and a multi-pixel Geiger mode avalanche photodiode readout in the Baksan underground laboratory at a depth of 200 metres of water equivalent. The total counting rate of the scintillator counter measured at this depth and at a threshold corresponding to ∼0.37 of a minimum ionizing particle is approximately 1.3 Hz.
Comparison between Theoretical Predictions and Legri Background Noise Experimental Measurements
2001
Trapped protons are responsible for the main component of LEGRI background. Detailed theoretical model has demonstrated that the proton-induced counting rate is two orders of magnitude larger than the counting rate of the diffuse gamma-ray flux. The continuous passes of LEGRI through the SAA (7 times everyday) makes very difficult the background modelling. Long and short lived isotopes contribute in very different time scales to the proton-induced background component. The goal of this paper is to present a comparison between the long-lived background noise theoretical predictions and the experimental data. The results show an unexpected good agreement between the predicted and the observed…
A simple two-detector method for precision intercomparisons of source strengths
1972
Abstract A two-detector method for comparing source strengths which largely eliminates errors due to uncertainties of geometric character is described. The simplest version of the method is based on the fact that, when a symmetric face-to-face geometry is being used, the change of the counting rate of one detector caused by the change of the position of the source is approximately compensated for by the change of the counting rate of the other detector. In a more versatile geometry, in which the axes of the detectors are slightly misaligned, the sum and the ratio of the two counting rates can be used in a simple manner to virtually eliminate uncertainties due to the shapes and horizontal po…
Phase transitions in Ag-based solid electrolytes as detected by thermosonimetry
2001
Abstract Observations of the acoustic emission accompanying the solid–solid (polymorphic) phase changes in silver iodide and silver chalcogenides were performed. It has been found that the temperature dependencies of both the number of acoustic events and their counting rate, registered when heating the investigated materials, display distinct anomalies at the temperature corresponding to the polymorphic phase transition occurring in a given substance. The phase transition temperatures determined from the position of these anomalies agree well with the results of control DSC measurements, as well as with the literature data on the temperatures of the transition of investigated materials to …
Real time digital pulse processing for X-ray and gamma ray semiconductor detectors
2013
Abstract Digital pulse processing (DPP) systems, based on direct digitizing and processing of detector signals, have recently been favoured over analog electronics, ensuring higher flexibility, stability, lower dead time and better spectroscopic performance. In this work, we present the performance of a new real time DPP system for X-ray and gamma ray semiconductor detectors. The system is based on a commercial digitizer equipped with a custom DPP firmware, developed by our group, for on-line pulse height and shape analysis. X-ray and gamma ray spectra measurements with cadmium telluride (CdTe) and germanium (Ge) detectors highlight the excellent performance of the system both at low and hi…
The features of electronics structure of the multichannel scintillation module for the EMMA experiment
2011
A brief description of the developed structural electric diagrams of 16-channel scintillation module for the underground EMMA experiment, the basic characteristics and parameters of the electrical diagrams of this module are presented. Multi-pixel photodiodes operating in a limited Geiger mode are used for photoreadout of the scintillator detectors in 16-channel scintillation module. The method of the automatic tuning of the photosensors gain based on the stabilization of an average counting rate of the scintillation detectors from gamma rays of a natural radioactive background is described. peerReviewed